427-0073-12-12 Version 120
May 2015
1-1
1
Camera Installation
This manual describes the installation and initial configuration of the FC-Series IP thermal cameras,
which includes the FC-Series S and FC-Series R camera models. These camera models are similar in
design and the physical mounting and installation of both models is the same. The FC-Series R
cameras have all the features of the FC-Series S plus an additional Radiometry feature that provides
the ability to issue alarms based on temperature. If help is needed during the installation process,
contact the local FLIR service representative or, call 888-747-3547 inside the US.
All installers and integrators are encouraged to take advantage of the training offered by FLIR; visit
http://www.flir.com/training
for more information.
This manual includes the following topics:
•
Installation overview
•
Mounting the camera and its components
•
Connecting the electronics
•
Bench testing the camera
•
Basic configuration and operation of the camera
•
Camera Specifications
For safety, and to achieve the highest levels of performance from the FC-Series camera system, always
follow the warnings and cautions in this manual when handling and operating the camera.
1.1
Warnings and Cautions
Warning!
Caution!
1.2
References
FLIR Doc # 427-00XX-XX-19S FC-Series S Interface Control Document (ICD), available on the
documentation CD or from the FLIR website, provides further details regarding mechanical dimensions
and mounting for the FC-Series camera.
FLIR Doc # 427-0030-00-28
Nexus IP Camera Configuration Guide
, provides more information on
setting or changing camera parameters.
These documents are provided for reference only.
If mounting the FC-Series camera on a pole, tower or any elevated location, use industry standard
safe practices to avoid injuries.
Except as described in this manual, do not open the FC-Series camera for any reason. Damage to
the camera can occur as the result of careless handling or electrostatic discharge (ESD). Always
handle the camera with care to avoid damage to electrostatic-sensitive components.
Prior to making any connections, ensure the power supply or circuit breaker is switched off.
Be careful not to leave fingerprints on the FC-Series camera’s infrared optics.
Operating the camera outside of the specified input voltage range or the specified operating
temperature range can cause permanent damage.
