427-1065-00-12 Revision 130
November 2019
45
This document does not contain any export-controlled information.
Advanced Configuration
IOI Interface
Install this interface to hand-off FB-Series ID detection events to the PTZ Tracker (trk-101-P). In
order to implement a hand-off from the FB-Series ID camera to a PTZ camera, the FB-Series ID
camera and trk-101-P are bound together from the web interface of the trk-101-P or from the FLIR
Latitude Network Video Management System. Users can define perimeters and areas for the FB-
Series ID camera to monitor (refer to
Video Analytics Setup—FB-Series ID Only, pg. 37
). When a
moving object is detected by the FB-Series ID, the trk-101-P can control and move the PTZ camera
to autonomously track and zoom in on the motion.
Step 1
Select
Maintenance > Sensor > VMS Remote
.
Step 2
Click
+
( ).
Step 3
From the drop-down list,
select
IOI Interface
.
Step 4
Click
Create
.
Step 5
Accept the message “Data for INTERFACE2 saved
correctly”.
Step 6
Using the Start button at the bottom of the page,
Stop and Start the server.
Click
Accept
at the prompt.
The status will show Server Stopped.
Click on the Start button again to restart the server.
Click
Accept
at the prompt.
The status will show Server Running.
Click
Select
Click
