427-1065-00-12 Revision 130
November 2019
33
This document does not contain any export-controlled information.
Advanced Configuration
3.1.1
Input/Output (IO) Page
The IO Info page shows a summary of the status of the GPIO signals.
3.1.2
Video Setup
Video:
By default, two video streams are enabled for the camera: Video 0 and Video 1. Both video
streams are available for viewing from a client program such as FLIR Latitude, a stand-alone video
player, or a third-party VMS (including ONVIF systems). To modify parameters that affect a particular
IP Video stream from the camera, select the appropriate link (for example,
Video - 0
).
With the factory configuration, the default parameters provide high-quality full frame-rate video
streams with reasonable bandwidth usage. In general, for most installations it will not be necessary
to modify the default parameters. However in some cases, such as when a video stream is sent over
a wireless network, it may be useful to “tune” the video stream to try to reduce the bandwidth
requirements. The Encoding parameters are described below.
After making adjustments, scroll down to save the changes through power cycles.
Table 3-1: GPIO Labels
Alarm Input1
User GPIO signals are enabled by default.
General Purpose Input/Output (GPIO), pg. 6
.)
Alarm Input2
Alarm Output
