427-1065-00-12 Revision 130
November 2019
37
This document does not contain any export-controlled information.
Advanced Configuration
3.1.4
Video Analytics Setup—FB-Series ID Only
The Analytics function of the FB-Series ID camera provides the capability to detect motion, send an
alarm, and classify detected objects as Human, Vehicle, or Object of Interest based on size and
aspect ratio (height and width).
Note
Using the
Setup
menu Analytics page, create motion detection areas, tripwire lines, or masking
areas—up to four of each. Each detection area or tripwire has independent detection properties
(such as detecting a vehicle or human sized object). Use the alarm manager in the
Maintenance
menu to define the actions resulting from each alarm condition (
).
Analytics Page
Use this page to set up areas (or regions) or tripwires for analysis. In some situations it may also be
useful to use multiple regions to include (or exclude) different areas in the scene and to set area-
specific detection parameters. The Analytics page allows the user to add four areas and four
tripwires. Each area/tripwire is assigned an Alarm ID number (1 to 8) based on the order in which
they are created and the available IDs. If an area is deleted, its Alarm Id will be available for reuse.
Analytics Calibration
•
The camera must be mounted in its final location in order to calibrate the scene in the field of
view using either the auto or manual calibration tool.
•
Analytics must be enabled to calibrate the scene.
•
Set detection areas and tripwires.
•
After calibration is finished, verify that the analytics detect and classify objects as expected.
Objects of interest are detected objects that do not quite match the human or vehicle aspect ratio,
but move through the scene uniformly. For example, a deer, bus, or oversized truck.
Add Areas
Global
Calibration
progress
Settings
Figure 3-1: Analytics Page
