FLIR Exx series, Руководство пользователя

Страница: 82 / 278

Working with measurement tools 15
15.3.2 Procedure
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select ( Measurement ) and push the navigation pad. This displays a submenu.
3. Use the navigation pad to select ( User preset 1 ) or ( User preset 2 ).
4. Push and hold the center of the navigation pad. This displays the Edit user preset
menu.
5. Select ( Add measurement ) and push the navigation pad. This displays a submenu.
6. Use the navigation pad to select one of the following:
• Select ( Add spot ) to add a spot.
• Select ( Add box ) to add a box.
• Select ( Add circle ) to add a circle.
• Select ( Add delta ) to set up a differential calculation.
7. Push the navigation pad. This displays the measurement tool on the screen.
8. Push the navigation pad. This displays a context menu, where you can select one or
more of the following actions (depending on the type of tool):
• Remove the tool.
• Resize, move, center, and rotate the tool.
• Set alarms.
• Display maximum, minimum, average, and area values.
• Set local parameters.
• When completed, select ( Done ) and push the navigation pad.
9. When all measurement tools have been added, select ( Save as user preset ).
10. Push the navigation pad to confirm and exit the menu mode.
15.4 Moving and resizing a measurement tool
15.4.1 General
You can move and resize a measurement tool.
15.4.2 Moving a spot
Note You can also move the spot by touching the screen.
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the navigation pad—or touch and hold the tool. This displays a context menu.
#T810190; r. AI/41890/41890; en-US
70