FLIR Exx series, Руководство пользователя

Страница: 49 / 278

Handling the camera 10
10.12 Assigning functions to the programmable
button
10.12.1 General
You can assign different functions to the programmable button . You can, for example,
use the programmable button to easily switch between two settings you use often. You
can also choose to define two different setups for saving and previewing: the ordinary set-
up for the trigger (which is defined by the
Save options and storage settings, see section
24.1.4 Save options & storage , page 100) and another setup for the programmable button.
Available options for the programmable button:
• No action : This is the default setting. Nothing will happen when you push the button.
• Switch Auto <> Manual temperature scale : Switch between automatic or manual image
adjustment mode. For more information, see section 13.3 Adjusting the infrared image ,
page 60.
• Autofocus : One-shot autofocus of the infrared camera.
• Continuous autofocus : Switch between the enabled/disabled continuous autofocus
functions.
• Hide image overlay graphics : Switch between hide/show all overlay graphics and image
overlay information. For more information, see section 13.8 Hiding all overlay , page 65.
• Calibrate : Perform a manual NUC. For more information, see section 13.7 Performing a
non-uniformity correction (NUC) , page 65.
• Auto-adjust the manual temperature scale : Perform an automatic adjustment of the im-
age while remaining in manual image adjustment mode.
• Switch Thermal <> Digital camera : Switch between the image modes Thermal and Digi-
tal camera . For more information, see section 14 Working with image modes , page 67.
• Switch Thermal <> Thermal MSX : Switch between the image modes Thermal and Ther-
mal MSX . For more information, see section 14 Working with image modes , page 67.
• Switch 1x zoom <> Max zoom : Switch between the digital zoom factor of 1× and maxi-
mum zoom.
• Switch camera flash On <> Off : Switch between the enabled/disabled camera flash
functions. For more information, see section 10.13 Using the camera lamp as a flash ,
page 38.
Note The flash function will not be activated if the setting Lamp & laser is set to the
option Disable all . For more information, see section 24.1.5 Device settings , page 100.
• Switch single shot <> Video : Switch between the recording modes Single shot and
Video .
• Switch between two latest palettes : Switch between the two last-used color palettes.
For more information, see section 13.5 Changing the color palettes , page 63.
• Switch temperature range : Cycle through the camera temperature ranges. For more in-
formation, see section 24.1.3 Camera temperature range , page 99.
• Switch screen rotation On <> Off : Switch between enabled/disabled screen rotation.
• Save : Save an image.
• Save + Prompt for note : Save an image and display the note annotation tool.
• Save + Prompt for table : Save an image and display the table annotation tool.
• Save + Prompt for voice annotation : Save an image and display the voice annotation
tool.
• Save + Prompt for sketch : Save an image and display the sketch annotation tool.
• Save + Select annotation from menu : Save an image and display the annotation tool
menu.
• Preview : Display a preview image.
• P Prompt for note : Display a preview image and the note annotation tool.
• P Prompt for table : Display a preview image and the table annotation tool.
#T810190; r. AI/41890/41890; en-US
37