30
(2) Play back the recorded video. (When playing back recorded video made by a multiplexer,
you must get into the multiplexing mode and display picture by picture in order to select
the desired image for archiving. Press the
Monitor
button
to get into the multiplexing
mode under this mode so that the light of the
Monitor
button
is off and the pictures
are switching swiftly)
(3) Press the
PAUSE
button
to freeze the desired pictures.
(4) Press the
Enter
button
to save the image in the SD Card.
The quantity of pictures that can be stored depends on the SD card capacity. It depends
on SD card capacity how many pictures can be stored. You can have the saved images
printed out in any computer. The image is stored in the JPEG compressed format. If
more than one clip is stored in a SD card, file names will be assigned in sequence as
shown below.
SAVE TO J0000.JPG
SAVE
TO
J0001.JPG
…
SAVE
TO
J000N.JPG
2.
Backup the System configuration settings onto an SD Card.
The DGR201 offers a quick setup method by using a SD card. If a user wants to set many
DGR201 devices with the same settings, the DGR201 could save the all the setting onto the SD
card, then transfer the setting to another DGR201.
To save the system configuration settings onto an SD card:
Insert an SD card into the SD card slot.
Press the
Setup
button
to enter the setup mode and select the
SYSTEM
.
Highlight
SYSTEM
and press the
Enter
button
to enter the
SYSTEM SETTING
page.
Set
SD SETUP
to
SAVE
. The system configuration settings will automatically be saved onto
the SD card.
Transferring the system settings info from one DGR201 to another:
Insert the SD card with the file containing the stored system configuration settings info into the
DGR201 SD-Card slot.
Press the
Setup
button
to enter the setup mode and select the
SYSTEM
option and press the
Enter
button
to enter the
SYSTEM SETTING
page.
Then set
SD SETUP
to
LOAD
.
Содержание DGR201
Страница 46: ...46 SIGNAL_REC_OUT 169 SIGNAL_ALARM_IN 189 ...
