the top of the remote will flash once then turn solid.
Release the key.
Note: If you do not press any key more than 30 seconds,
the remote will exit the program.
3. Enter the first 3-digit code for your TV using the
0-9
key pad. If the code is entered correctly, the light will
turn off. If the light stays on, please try again.
4. Try the remote to see if it controls the TV by pressing
the
key and
.
5. If the remote is adjusting your TV, go to
Step 2
.
6. If the remote does not adjust your TV, repeat the
process using the next 3-digit code listed for your TV
brand until the remote works.
Note: If you are unable to find a working code, see “
Other
Set Up Options
.”
The code for my TV is ______.
2. Press and hold the
TV
set-up key. The indicator light at
hi
hi
hi
hi
hi
hi
ON/OFF
Volume Up/Down
Step 2: Set Top Box (STB)
If you are using a TV without a STB, go to
Step 3.
Flipper is preset to Motorola cable STBs. It may not work
all Motorola STBs, however. If your STB is manufactured
by Motorola, press
STB
once (the light will flash) and see
if Flipper works your STB. If yes, go to
Step 3
. If not,
follow the set up instructions in
Step 1: TV
, except find
your STB code, and press
STB
instead of
TV
in # 1.
The code for my STB is ______.
hi
h
i
Step 3: Favorite Channels
Setting Favorite Channels is optional. If you do not want
a favorite channel list, go to
.
Step 4
You can program up to 30 of your favorite channels.
When set,
only scrolls through your
Favorite Channels. The
0-9
keypad allows you to key in
any available channel. Programming favorites does not
change the settings on your STB or other remote controls.
Channel
Up
/
Down
4
Note: When advancing through your favorite channels
using the
buttons, please allow
the channel to switch before pressing the button
again.
Make a list of your Favorite Channels. The channels will
advance in the order they are entered. For instance, if
you program channels 225, 125, 57, and then 563, the
will memorize them in that order
and advance as 225, 125, 57, 563. Flipper does NOT
place channels in numeric order.
STBs and TVs generally use a three or four digit channel
entry system, 000 or 0000. To enter channels, use 0’s as
a place holder. For instance, enter channel 7 as 007
(three digit) or 0007 (four digit). For channel 22, enter
as 022 or 0022. If your TV or STB requires an Enter key
to change channels, please see “
Channel Entry Options
.”
Please consult your DTV manual. Use the
dash
“
-
”
button, if needed. Some DTVs do not use a dash, and
instead may enter channels in different formats, such as
401 for channel 4-1, or 0301 for channel 30-1.
If using a newer TV with an over the air digital turner,
you may need to learn the dash key from your existing
remote. See “
Learning Set Up
”
The instructions below assume that you are
programming Favorites to work with an STB device. If
you are using a TV without a STB, substitute the
TV
key
for the
STB
key.
1.
Press
STB
then
ADD
. The indicator
light
will
flash
once
then turn
solid
.
Release both
buttons
.
2.
Key
in
the
first
channel
and
press
the
ADD
button,
key in the next channel and then
ADD
, and continue
until all channels are added. The light will flash one
time for each digit.
Channel
Up
/
Down
Channel
Up
/
Down
hi
Make a list:
Channel Format:
DTV channel format:
Adding Favorites:
hi
hi
hi
hi
hi
hi
hi
hi
hi
hi
I
hi
hi
5
