Equipment
53
8.7 Mechanical stopcock for hydraulics (maintenance work)
Failure to observe the above instructions
can result in life-threatening injuries.
The stopcock is integrated in the supply line to
the tipper press. It is used to block the
hydraulics during maintenance work.
Open Closed
Fig. 41
:
Stopcock
Attention!
Before performing maintenance work between the tipper bridge and the
chassis, the stopcock for the tipper hydraulics must be closed.
This prevents accidental lowering of the tipper bridge.
A bridge support is required to perform maintenance with a raised tipper bridge. If it is
not available, the operator must provide a secure support; otherwise, it is not
permitted to perform maintenance work with the bridge raised.
See section 9.14
Use of the bridge support with a raised tipper bridge is mandatory during
maintenance.
