Preparation and setup
37
6. Preparation and setup
The following steps must be performed to set up and prepare the machine:
Set up the draw gear
Establish the hydraulic and brake connections
Establish the electrical connections
6.1 Draw gear
6.1.1
Draw gear with top hitch
Objective
Adjustment of the traction bar.
The vehicle is preconfigured for top attachment by the manufacturer.
Depending on the towing vehicle, a slight adjustment of the traction bar height may be required.
For this purpose, a hole pattern is provided on the traction bar support.
The trailer must be as horizontal as possible when coupled.
Prerequisites
Suitable spanners (torque wrenches)
Means of supporting and protecting against falling
Fitting location
Thread
– grade (min.)
Tightening torque [Nm]
Drawbar eye
M20
– 10.9
465
Traction bar
M30
– 8.8
1400
Supporting foot
M24
– 8.8
570
6.1.2
Draw gear with overrun brake
The draw gear is connected to the overrun brake mechanism; see section 6.2 and 6.5.1.
