Safety instructions
15
Handling the mech. support wheel
Coupling the EDK
Couple the EDK to the tractor
(the coupling height can be adjusted via the mechanical support wheel).
The load on the support wheel can be reduced by operating the hand crank.
Crank the support wheel in completely and then fold it up.
Uncoupling the EDK
Fold down the support wheel. Raise the vehicle again via the mechanical crank and
uncouple it.
Disconnect the hydraulic and electrical lines as well as the brake system and
uncouple the vehicle.
The tractor is a weight-bearing element for single-axle trailers. Therefore, the
trailer must only be set down on the support wheel when it is empty.
