Step 3
03
Step 4
04
Step 6
C
x8
F
4x4
Install the Feet
C
F
1
2
Place the feet(1) on the bottom of the lifting column(2).
Fix the feet using screws(C) with Allen Key(F).
E
x12
Install the Tabletop
F
4x4
2
1
E
E
The expansion distance of the
supporting beam can be adjusted
according to the actual use.
When the supporting beam is greater than
67.7"
, the
installation method is as follows: Method 2 in Step 6.
Loosen
Adjust
Tighten
Step 5
7
AC
HS M1 M2
8
DC
Port for
hand switch
Power port
Port for cable
connected to the
lifting column
Install the Cable Management Tray
B
x4
F
4x4
1
2
3
3
4
B
Method 1
Tighten
Buckle the other side
Slide one side
Firstly, rotate the screws (B) incompletely into the supporting beam (4)
with Allen Key (F), which means do not tighten them. Next, slide one
side of the cable management tray (3) into the screws (B), then the
other side. Finally, tighten the screws (B) with Allen Key (F).
B
x4
F
4x4
D
x4
3
4
D
B
B
D
Method 2
Install the cable management tray as Method 1, Step 6.
When the supporting beam stretches over
67.7
",
the cable management tray needs to be mounted on
the middle of the supporting beam.
Do not stretch the support
beam beyond this hole
Port for
hand switch
Содержание E7CB
Страница 1: ...Item No E7CB E7CW E7CS Installation Guide...
