Flexcom Communication Ltd
Installation and operating instructions (2021/03/16)
5/22
How to use
The device can be used after inserting and installing a SIM card and setting it up via SMS or a mobile
phone or PC application. Once connected to an external power source, the GPS receiver and SIM card
will automatically connect to the GPS and GSM networks (if available) and begin collecting position
data, which can be queried using SMS or an Internet application. To use the features of your device,
you need a SIM card, similar to a mobile phone. The device communicates with the mobile service
provider's network via SIM card, SMS or mobile phone or PC applications.
After inserting the SIM card and charging the battery, you can make the necessary settings by
sending an application or SMS (eg entering the device ID name, frequency of sending GPS position
data, etc.).
When switched on
The device continuously registers position data, which can be queried with SMS commands at a
limited level.
If you have a software subscription, the device sends the position data to the software service
center - these are
processed results (eg map route display, route event list, real-time tracking) - can be viewed in the
phone or PC application. The subscription software provided by the distributor for the device greatly
expands the range of features of the device. These extensions are only available in the mobile or PC
application.
You will find detailed information on the installation, use, maintenance and decommissioning of the
device in the following sections of the documentation.
Flexcom
