Flexcom Communication Ltd
Installation and operating instructions (2021/03/16)
18/22
General settings
Function
Description
Administrator phone number
After setting the administrator's phone number, the
tracking device only accepts certain commands in
SMS messages from that number. The command -
given the password - can be issued from any phone.
Server setup
If you use your device through a computer service,
enter the address of the server that receives the
data. The command can only be issued from the
administrator phone.
IP url port
Example: IP www.szerver.com 8012
Setting time zone
The device default time zone is set to GMT + 0. This
is changed (eg in the case of Hungary, the time
zone is GMT + 1), as follows.
timezone123456 value (where value: pl.
+1, -2, 0 etc).
Example: timezone1
Frequency of data
transmission
Frequency of data submission in case of data
collection on a server. The command can only be
issued from the administrator phone.
upmovejelszó seconds
Example: upmove123456 30
Voice monitoring
Turn on the monitoring of ambient sounds and
noises (microphone reception). The command can
only be issued from the administrator phone.
88
Monitor Ok
Initialize satellite connection
Search for satellites. The command can only be
issued from the administrator phone.
CQGPS
GPS reset Ok
Restart the device
You can also switch the device on and off (restart)
from your phone. The command can only be issued
from the administrator phone.
CQ
Reset Ok
Turn off the device remotely
You can also turn off your device from your phone.
The command can only be issued from the
administrator phone.
poweroff,123456
Poweroff Ok
Checking the device
Retrieve device status information. The command
can only be issued from the administrator phone.
CXZT
Data set
characterizing
the operating
status of the
device.
Factory default setting
Reset the device to factory settings. The command
can only be issued from the administrator phone.
Format
Ok
Sleep mode
The device - e.g. to save energy, you can switch it
to sleep mode. There are two versions of sleep
mode:
•
timed mode: wake up to any command or voice call
and then return to sleep mode after 5 minutes, or
•
“Shock” mode: waking up to external influences (eg
vibration) and then returning to sleep mode after
rest. This mode should be used, for example, while
driving.
In sleep mode, satellite communication is paused,
and the mobile network connection operates at a
basic level.
Activation in timed mode:
SMS: sleep123456 time
Activation in "shock" mode:
SMS: sleep123456 shock
To deactivate any sleep mode:
SMS: sleep123456 off
Sleep time
Ok, Sleep
shock Ok or
Sleep off Ok.
Switch GPRS mode (data
traffic) on and off
The GPRS data transfer mode is switched off by
default in the device (GSM mode is active). If you
use tracking software, the GPRS mode must be
turned on.
If you have purchased the device with a software
service subscription from the dealer, the GPRS
mode is already activated!
Activate:
SMS: gprs123456
Deactivate:
SMS: nogprs123456
GPRS Ok, or
NOGPRS Ok.
Query the position of the device
Description
SMS
Device response
The following command returns a
Google Map link, which, when
clicked (or tapped), displays the
map with the device's indication
on it.
SMS: G123456#
or with LBS-based positioning
Flexcom
