Flexcom Communication Ltd
Installation and operating instructions (2021/03/16)
10/22
If you have received the SIM card from your dealer, do not try to transfer it to another
device (eg phone) and use it! The distributor (service provider) will reimburse the
resulting costs or the correction of the resulting errors.
Settings for your SIM card
If you did not obtain the SIM card from your tracking device vendor, you must set it up before
inserting and using it in the device, which you can do as follows.
Disable SIM card PIN and other functions
Insert the SIM card in your phone.
1.
Among the setting functions of the phone
2.
turn off the PIN code request, auto-reply and call forwarding options.
3.
After turning off the above, insert the card into the tracking device. See the next section for
instructions on how to insert the SIM card.
Setting up data traffic
If you want to operate the device not only via SMS, but also e.g. If you use the software tracking
service provided by your dealer, you must activate GPRS (Internet) data traffic and enter the
appropriate network settings. To do this, you must send SMS messages from your phone to the phone
number of the SIM card inserted in the tracking device, as shown in the table below.
The factory-set access password for the tracking device in the commands: 123456
Setting
SMS content
Device response
Turn on GPRS data
traffic
gprs123456
GPRS ok
Setting APN name
apn123456 APN-name
apn ok
APN names for domestic service providers: Telenor:
online or net
Telekom: internet
Vodafone:
- in case of subscription: internet.vodafone.net
- in the case of a top-up card:
vitamax.internet.vodafone.net
Digi: internet
If your mobile network provider has not provided you with an APN username and password, you do
not need to send the following SMS messages to the tracking device!
APN username
apnuser123456 APN-username
apnuser ok
APN password
apnpasswd123456 APN-password
apnpasswd ok
Flexcom
