Belt Thickness
For Fastener Size
in.
mm
R5
R5-1/2
RAR6LP
R6/R8
R9
7/32
6
A
9/32
7
B
5/16
8
C
B
11/32
9
C
3/8
10
C/D
13/32
10.5
C/D
D
C/D
7/16
11
D
15/32
12
E
E
1/2
13
E
17/32
13.5
F
F
9/16
14
F*
19/32
15
G
G
5/8
16
G*
21/32
16.5
H
H
11/16
17
23/32
18
I
3/4
19
25/32
20
J**
13/16
21
27/32
21
K**
7/8
22
15/16
24
SR
™
RIVET SELECTION CHART
For use with Flexco
®
Rivet Hinged Fasteners and Rapid Loader
™
Collated Rivets
* Applies to RAR6LP only
** Use with 3/4" (19mm) diameter hinge pin
NOTE:
• When installing Flexco Rivet Hinged fasteners with the Flexco Power Set
™
Rivet Driver, you must use Rapid Loader
™
Collated Rivets
with washers
.
• In areas of overlap, to select the proper rivet choose the shorter rivet for softer, compressible belts and the longer
rivet for hard belts.
Skiving Recommended:
Whenever possible, Flexco recommends skiving the belt in order to countersink mechanical fasteners. Skiving reduces the
fastener profile on the belt, resulting in improved fastener/cleaner compatibility and increased fastener service life. To determine
proper rivet selection, always measure the belt thickness after a portion of the belt cover has been removed. This may allow
for the selection of a one to two size shorter rivet for increased material savings while maintaining maximum holding ability.
In some cases, where belt-operating tension allows for it, a smaller fastener can be applied.
®
9
NOTE:
The Power Set
™
Rivet Driver can only be
used with Power Set
Rapid Loader
™
collated
rivet strips with washers.
Содержание PSRD-1
Страница 15: ...15...
