Flexco PLY 130 WB, Руководство по безопасности и эксплуатации, Страница: 9 / 36

—9—
General Safety Rules -Save These instructions-
!
CAUTION
Do not force tool when the belt material blocks
or jams and do not continue feeding the material
through tool. When jamed put the operating
direction in reverse to remove the material.
!
WARNING
Do not use tool if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
!
WARNING
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing or transporting the tool.
Such preventive safety measures reduce the risk
of starting the tool accidentally.
!
WARNING
Store idle tools out of reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
!
CAUTION
The Ply Separator should not be used to split
other materials than thermoplastic belting
materials. The thickness of the belting material
should never exceed 10 mm.
!
CAUTION
Check for misalignment or binding of moving
parts, breakage of parts, and any other condition
that may affect the tool’s operation. If damaged,
have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
!
WARNING
Stow foot pedal when not in use.
!
WARNING
Disconnect and stow cables before moving.
5. SeRviCe AnD MAinTenAnCe
!
WARNING
Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified
personnel could result in a risk of injury.
!
CAUTION
When servicing a tool, use only identical
replacement parts. Use of unauthorized parts or
failure to follow Maintenance Instruction may
create a risk of electric shock or injury.
! dANGeR
Do not use power tools if the housing is
damaged or not closed. Damaged or (partially)
open housing can lead to electric shock. Such
tools should not be used until repaired or closed.
!
CAUTION
Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner, benzene,
carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with
such solvents. Wipe plastic parts with a soft
cloth lightly dampened with soapy water and
dry throughly.
!
WARNING
NEVER use a tool which is defective or
operating abnormally. If the tool appears to be
operating unusually, making strange noises,
or otherwise appears defective, stop using it
immediately and arrange for repairs.
!
CAUTION
Maintain tools with care. Keep blades sharp
and clean. Properly serviced tools and knifes
with sharp edges are less likely to bind or clutter
material and are easier to control.