Flexco PLY 130 WB, Руководство по безопасности и эксплуатации, Страница: 6 / 36

www.flexco.com
—6—
Tool Specifications
Description
The Ply 130™ is used to separate between the plies of a
conveyor belt. This cutting action is often required in
preparation before splicing a belt with a splice press.
A great advantage of this ply separator is that it can
split as deep as 5” (130 mm) in one action. This is
especially helpful when splitting very thin belts which
are difficult to cut, such as thin polyurethane belts.
The robust construction of the Ply 130™ allows for precise
splitting of thermoplastic belts - both thin and thick. As little
as 0.014” (0.35 mm) can be separated - allowing for users to
create film from the belt used in the splicing process.
The Ply 130™ can be used to prepare finger over finger
splices and stepped splices. With only one handle you
determine the depth you want to split the belt. It may be
possible to split between every layer of the belt and in this
way generate two or three separations within one belt.
Ply 130 ™ Ordering Information
Ordering
Number
Item
Code
NEMA
Plug
Work Bench Model
PLY130-WB-460V3PH60HZ 08013 no plug
PLY130-WB-460V3PH60HZ-L16-20 08053 L16-20
PLY130-WB-460V3PH60HZ-L16-30 08054 L16-30
PLY130-WB-400V50HZ 08102 no plug
PLY130-WB-230V3PH50HZ 08046 no plug
PLY130-WB-230V3PH50HZ-L15-20 08055 L15-20
PLY130-WB-230V3PH50HZ-L15-30 08056 L15-30
PLY130-WB-230V50HZ 08246 no plug
Cart Model
Ply-130-CART-ONLY 08100 no plug
Replacement Parts
PLY-BL Blade & Jig 08014 N/A
PLY-JG Jig Only 08015 N/A
Ply 130 ™ Tool Specifications
Specifications Minimum Maximum
Splitting Depth 1.5” (40 mm) 5.1” (130 mm)
Belt thickness above cut .014” (0.35 mm) .3” (8 mm)
Belt thickness below cut .014” (0.35 mm) .2” (5 mm)
Maximum belt thickness N/A .4” (10 mm)
Tool dimensions
22” x 17” x 17”
(550 x 420 x 420 mm)
Tool weight 121 lbs (55kgs)