www.flexco.com
—6—
Power Belt Skiver
6. BELT SKIVER SAFETY
!
WARNING
Ensure drive and rear roller guards are in place
before operating.
!
WARNING
Never hold piece being cut in your hands or
across your leg. It is important to support the
work properly to minimize body exposure, blade
binding, or loss of control.
!
WARNING
Do not run the skiver while carrying it.
Accidental contact with the spinning roller
could result in serious personal injury.
!
CAUTION
Do not use a dull or damaged blade.
General Safety Rules
7. REPLACING THE SKIVER BLADE
!
WARNING
Always wear cut-proof safety gloves and safety
glasses when replacing blade. Blade is razor
sharp, treat it accordingly.
!
WARNING
Before performing a blade replacement, remove
battery from tool and follow all procedures
noted in manual.
!
WARNING
Only authorized and trained technicians should
work on the skiver.
!
WARNING
Test the skiver after blade replacement to make
sure that it can be used safely.
Operation of Cordless Electric Drill
1. For normal use, operate in Reverse
Direction; press drilling direction button
for reverse direction operation.
2. Operate in Maximum Torque Mode only;
turn the dial to indicate drill mode.
3. Cutting Speed Adjustment; adjust
Electric Drill to low speed by moving
switch to low speed. For best results, always
operate skiver in low speed.
