—2—
—3—
Power Belt Skiver
General Safety Rules
–
Save These Instructions–
Signal words:
“DANGER” indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury. The signal word is
limited to the most extreme situations.
“WARNING” indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury. It may also be used to
alert against unsafe practices.
Safety Symbol
!
This international safety symbol is used to
identify and call attention to specific safety
matters.
Safety Information
To avoid severe personal injury or property
damage, read carefully and understand the
following Safety Precautions.
1. WORK AREA
!
CAUTION
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
!
DANGER
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks, which may ignite the dust of fumes.
!
CAUTION
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
!
WARNING
Never leave tool until it comes to a complete stop.
!
CAUTION
Operation of gear units is permitted at ambient
temperatures between -4°F and +104°F (-20°C
and +40°C). However, for temperatures between
-4°F and +14°F (-20°C and -10°C), unit may
only start up after it has been progressively and
evenly pre-heated, or otherwise initially operated
unloaded. Load may then be connected to the
output shaft when the gear unit has reached the
temperature of 14°F (-10°C) or higher.
2. ELECTRICAL SAFETY
!
DANGER
Double Insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any
way. Double Insulation eliminates the need
for the three wire grounded power cord and
grounded power supply system.
