FlexArm FLEXARM RNR, Руководство по установке и эксплуатации

Страница: 8 / 29

1/4/2021 REV. 002 8
COUNTERBALANCE ADJUSTMENT
Both the front and rear arms counterbalance can be adjusted to meet the operator preference.
To adjust the counterbalance, turn the adjuster knob located between the top plates for the front arms, and
the adjuster knob located between the rear plates for the rear arms (see
Figure 6 ).
When adjusting the front cylinder, it will be easier to turn the adjustment knob if the front arms are fully
extended up. When adjusting the rear cylinder, it will be easier to turn the adjustment knob if the rear arms
are pulled down, parallel to the floor.
1. To decrease the counterbalance force applied by
the gas cylinders, turn the knob of the
adjuster knob clockwise.
2. To increase the counterbalance
force applied by the gas
cylinders, turn the knob of the
adjuster knob counter-clockwise.
Figure 6