1/4/2021
REV. 002
19
RNRM: INSTRUCTIONS
1.
To use the multi-head option for an RNR, first start by loosening the handle shown in
Figure 11
. This
will allow the gearbox/motor to freely rotate right or left as shown in
Figure 12.
Make sure you have a
firm gasp on the motor.
2.
Loosen the handle shown in
Figure 13
to be able to rotate the multi-head down so that the motor is in
a horizontal orientation parallel to the work surface. Be sure to have a firm grasp on the motor so that
it does not fall unsupported. Failure to support the motor when rotating it to the horizontal
orientation has the potential to cause harm or damage to the arm, motor, gearbox, or operator.
Figure 11
Figure 12
Figure 13
Содержание FLEXARM RNR
