Flexa CWT GALAXY, Руководство по эксплуатации и обслуживанию

Страница: 62 / 94

7.18 Material loading procedure
7.18.1 Procedure for applying self-adhesive film without protective liner (double-sided adhesive,
application tape)
Raise the upper roller (R1).
1.
Stretch the adhesive film (B) evenly on the upper
roller (R1).
2.
Block the adhesive film (B) on the rear worktop. 3.
Position the support to be processed (C) on the
worktop (D).
4.
Completely lower the upper roller (R1) and adjust
pressure.
5.
Detach the adhesive film (B) from the rear worktop.
6.
Start the work cycle. 7.
Stretch the adhesive film evenly during film application operations.
If the support to be processed is not rigid, position the initial margin over the slit between the lower rubber roller and
the rear worktop.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
54