Flexa CWT GALAXY, Руководство по эксплуатации и обслуживанию

Страница: 53 / 94

●
●
●
●
7.8 Machine in safe conditions for various operations
Setting the machine in safe conditions means making it impossible to start or carry out any movement whenever it is necessary
to intervene directly on it or on its parts, for example for cleaning, maintenance, etc.
To set the machine in safe conditions:
Switch off the machine. See par. 7.7.
Disconnect the machine plug from the power supply socket.
7.8.1 Safely restarting the machine
To restart the machine:
Reset the electrical connections. See par. 5.6.1.
Switch on the machine. See par. 7.2.
7.9 Safety reset procedure
A self-diagnosis cycle will be carried out after the machine has been switched on via the main switch.
If the self-diagnosis cycle is positive, put the following procedure into effect:
The LED flashes and there is no acoustic signal.
1.
Press the safety reset button. 2.
The LED stays on with a steady light (the machine is ready to start).
3.
If the self-diagnosis cycle is negative, put the following procedure into effect:
The LED flashes and there an intermittent acoustic signal.
1.
Press the safety reset button. 2.
The LED continues to flash (the safety device has been triggered).
3.
Check the safety devices to reset machine operation. 4.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
45