Flexa CWT GALAXY, Руководство по эксплуатации и обслуживанию

Страница: 61 / 94

7.17 Material tension adjustment procedure
Optimal adjustment is achieved when the material is stretched on the upper roller and feeds free of creases. It is best to keep
the braking force to a minimum to prevent the material from stretching out during lamination.
Adjustment knob
Turn clockwise to increase material tension.
●
Turn counter-clockwise to decrease material tension.
●
Shaft clutch adjustment
Follow the procedure below to adjust the clutch:
Arrange the materials. See par. 7.18.
1.
Completely decrease the clutch brake. 2.
Start up the work cycle at low speed.
3.
Gradually increase the clutch brake to start shaft rotation. 4.
The recovery speed increases as the diameter of the roll increases.
Decrease the clutch brake to maintain correct shaft rotation.
The material being processed must be kept slightly taut.
Excessive tensioning of the material can cause excessive drive system
stress and rewinding of the material being processed. Excessive stress
can trigger the motor thermal protection and damage the inverter
and/or the transmission system for motion to the shafts.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
53