Risk of electric shock – cord connected models are supplied with a grounding
conductor and grounding-type attachment plug. To reduce risk of electric shock, be
certain that it is connected only to a properly grounded, grounding-type receptacle.
Electrical connections and grounding (earthing) must conform to local wiring codes.
Be certain that a grounding conductor is connected to terminal T11-1 located in the
wiring compartment.
Risk of electric shock - Disconnect electricity before removing the wiring
compartment cover.
Page 9
Flex-Pro
To PRIME pump
Press
PRIME button to start 60 second prime feature. Pump will run at full speed for 60 seconds or
until STOP or START button is pressed. STOP button will stop pump and display will read OFF. START
button will stop prime feature and jump back into previous operating state.
To REVERSE ROTATION of rotor
Press
REVERSE ROTATION button to reverse flow.
6.0
How To Operate Flex-Pro
Flex-Pro
Control Panel - Button Operation
To STOP pump at any time
Pump can be stopped at any time by pressing STOP button.
overrides all other controls and stops pump. Display will read OFF if pump has
been stopped in this manner. Pump will not respond to incoming input signals
while in OFF state. When START button is pressed, pump will start according to
it’s previous operating state.
STOP button
To START pump
Press START button to start pump. If a remote start/stop input signal is used, the pump will begin
“listening” for the input signal.
Pressing the START button repeatedly will toggle the display to indicate the %SPEED, RPM, and Tube
Timer Hours.
UP Arrow
Press UP arrow to increase pump output.
Press UP arrow to navigate through menu items.
DOWN Arrow
Press DOWN arrow to increase pump output.
Press DOWN arrow to navigate through menu items.
CAUTION:
Motor will reverse its rotation immediately after the REVERSE ROTATION button is pressed.
CALL 1-800-577-8111 FOR SALES AND SUPPORT
CLICK HERE TO RETURN TO WEBSITE
