7
TAILWHEEL INSTALLATION
Required Tools and Fasteners
: #1 Phillips Screwdriver, (2) M2x6 self-tapping Phillips head cap screws
1.
Locate the vertical fin assembly, tail wheel and tail wheel retaining plate. Insert the tail wheel assembly into the bottom of the
rudder, being sure to orient it so that the tail wheel wire angles towards the tail as the wire moves away from the fuselage.
2.
Insert the retaining plate into the cavity on the bottom of the rudder. Use a #1 Phillips screwdriver and the two M2x6 self-
tapping screws to secure it in place.
(QTY 2)