5
MAIN LANDING GEAR INSTALLATION
Required Tools and Fasteners
:
#2 Phillips Screwdriver
(6) M3x10 Phillips Head Self-Tapping Screw
7mm Socket Wrench
(2) M3x15 Phillips Head Machine Screw
Needle Nose Pliers
Blue Thread Lock
7mm Open Wrench (optional)
Adjustable Wrench (optional)
1. Locate the landing gear. Using blue thread lock, install the landing gear on the fuselage using a #2 Phillips screwdriver and two M3x15 screws.
2. Locate the landing gear wheel pants. Place the inside half of the wheel pant against the outside of landing gear leg, and the wheel pant
retaining plate against the inside. Note that the retaining plates are identical. Use a #2 Phillips screwdriver and a M3x10 screw to secure the
wheel pant half in place. Be sure the wheel pants are oriented in the proper direction.
3. Locate the wheel and axle assembly. Remove the nut from the axle and insert the axle into the landing gear bracket.
Nose
Tail
(QTY 6)
(QTY 2)