Before assembling the machine,
determine whether you will
anchor the Saber 250-A to your
work surface. Placing and
securing the machine will be a
matter of personal preference
and it is left to the owner to
decide how best to use the
Saber.
The Saber 250-A should be
placed so that the front of the
machine is facing the operator.
Be sure to leave sufficient room
for attaching the base
assembly. The base assembly
will run along the front edge of
the workstation.
If you decide to anchor the
Saber 250-A to your work
surface, locate the four,
predrilled holes on the
crossmember of the frame
(
Figure 7). These will allow you
to secure the machine with four
bolts (not included).
Please Note:
When the base is attached
to the tower, a squaring
procedure must be
followed to ensure proper
alignment.
(See Figure 8.)
Figure 7 (Shown with machine’s cover removed)
þýüû ú
