background image

 Be sure to read the instructions in this section carefully before use.
 Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
 regarded as very important precautions are included.
 We also recommend you keep this instruction manual handy for future reference.

Safety Symbol and Message Conventions

Safety symbols and messages described below are used in this manual to prevent bodily injury and property 
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety 

Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.

Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

 Do not place cups, bowls, or other containers of
 liquid or metallic objects on top of the unit. If they 
 accidentally spill into the unit, this may cause a
 fire or electric shock.

  Do not insert nor drop metallic objects or flammable
  materials in the ventilation slots of the unit's cover, 
  as this may result in fire or electric shock.

When Installing the Unit

When Installing the Unit

   Should the following irregularity be found during 
   

use, immediately switch off the power, disconnect

   

the power supply plug from the AC outlet and contact

   y our nearest  FLEPCHER  dealer. Make no further 
   attempt to 

operate the unit in this condition as this 

   may cause

 fire or electric shock.

      If you detect smoke or a strange smell coming
      from the unit.
      If water or any metallic object gets into the unit
      If the unit falls, or the unit case breaks
      If the power supply cord is damaged (exposure 
      of the core, disconnection, etc.)
      If it is malfunctioning (no tone sounds.)

   To prevent a fire or electric shock, never open nor
   remove the unit case as there are high voltage 
   components inside the unit. Refer all servicing 
   to your nearest 

 dealer.

FLEPCHER

   

Do not expose the unit to rain or an environment

   

where it may be splashed by water or other liquids,

 

   as doing so may result in fire or electric shock.

   Use the unit only with the voltage  specified on 
   the unit.Using a voltage higher than that which
   is specified may result in fire or electric shock.

   

Do not cut,kink otherwise damage nor modify the

   power supply cord. In addition, avoid using the 
   

power cord in close proximity to heaters, and never 

   

place heavy objects - including the unit itself - on

   the power cord, as doing so may  result in fire  or

   electric shock.

 

Be sure to replace the unit's terminal cover after

 connection completion. Because high voltage
 is 

applied to the speaker terminals, never touch

 these 

terminals to avoid electric shock.

 Be sure to ground to the safety  ground (earth)
 terminal to avoid electric shock. Never ground 

to a gas pipe as a catastrophic disaster may result.

 

Avoid installing or mounting  the unit in  unstable

 

locations, such as on a rickety table or  a slanted

surface. Doing so may result in the unit  falling 

down,causing personal injury and / or property

 

 damage.

1. SAFETY PRECAUTIONS

1

Содержание FLP-PA4500D


















Отзывы: