Fleischmann PROFI-BOSS 686601, Руководство по эксплуатации

Страница: 27 / 31

❖
Menu MASTER
If you intend to use the PROFI-BOSS in
conjunction with other PBs, here you set
which of them will be the master PB. (see
additional for further information). If it is
to be the master, then the other slaves
connected to it using the LocoNet cable,
will search for the master controller and
use its databank.
❖
Menu Reset
ATTENTION !!!
Using this menu, you will erase all of
your personal settings which you have
carried out,
and return all the settings
back to the factory settings.
Please consider very carefully whether
this reset step is really necessary.
You can’t go back once you’ve done it!
7. Additional
Here you will find all sorts of handy bits of
information concerning your PROFI-BOSS.
ANOTHER IMPORTANT PIECE OF ADVICE
ABOUT THE EMERGENCY STOP:
If you have activated the emergency stop by
pressing the control knob twice, then the loco
actually under control at that time will be
stopped (V=0). On restarting the layout again,
all of the other locos will start to run at their
last speed setting and direction. If you don’t
want this to happen, then using the following
trick, you can keep them all at a standstill
49
If you press SEL , the PB will display your
loco databank. From this list you can
select your start loco address = start loco
number. The new start loco will imme-
diately be displayed.
You can alter the display capabilities of your
PROFI-BOSS to your own personal design if
you want to, changing the contrast, bright-
ness and menu language.
❖
Menu Settings/Contrast/Language .
By accessing the desired menus, you can
alter the
contrast, brightness or lan-
guage by rotating and pressing the ......,
or similarly using the ....... keys.
Confirming by pressing PROG will alter
the previous setting.
Setting the contrast:
➙
Turning the control knob anticlock-
wise, the contrast will become stronger.
Turning it in the opposite direction will make
it weaker.
Setting the brightness:
➙
Turning the control knob anticlock-
wise will give more brighter display, the
opposite direction will make it darker.
Setting the language (= Sprache):
➙
By rotating the control knob, you can
select from the following languages:
German, English, Italian, French, Dutch,
or Swedish.
Press the control knob once, if
you have found the right one.
48
!!!
Expert Knowledge Expert Knowledge