47
1. Level / 4. Main menu: PROFI-BOSS
In the 1st level, find the main menu
PROFI-
BOSS
.
Here you can adjust the
settings of the
PROFI-BOSS controller
, read out the
soft-
ware version
and several more items which
we can now go into a little further.
❖
Menu
Database 123
Here you can decide whether to store
your databank in the PROFI-BOSS either
numerically or alphabetically.
Simultaneously, the entry capacity of the
databank will be given in percent.
Alter
with
SEL
and or
Confirm
the input with
PROG.
❖
Menu
Version x.x.xx
Here you see the software version of your
PB displayed (important to know in case
of questions, updates, etc.).
❖
Menu
Speed Steps
Here you see the number of speed steps
which has been set in the PB. Ex-works: 28.
Possible speed steps are: 128, 28, 14.
Alter
with
SEL
and or
Confirm
the input with
PROG.
❖
Menu
Start loco number
Here you set which loco (address) will be
first shown in the running menu when
starting off. Works setting is 3.
Using the
SEL
, select the desired favourite
entry which you wish to have.
By turning the
.....
or by using the
.......
keys, or by simply inputing via the keyboard,
enter the value = magnetic article output
number from 1 -99.
MA from 100 to 2000 cannot be used as
favourites.
For example: If the point number 17 on your
layout is used a lot, so it ought to be saved as
a favourite.
➙
Go to the menu
favourites
➙
Go to the
favourites 1 1
in the menu
➙
Press
SEL
➙
Input
17
➙
Press
PROG
.
Point number 17 is now favourite number 1.
Back in running mode, you will only need to
press the "alt” key to display your favourites.
(you can already handle the accessing of var-
ious other menus).
This will give you a great advantage if you are
dealing with higher point numbers so that
you don’t need to keep searching through
menus to find the numbers.
Referring back to the table on pages 30/31,
we can examine the additional menu points
(
v
).
46
Expert Knowledge
Expert Knowledge
