Flavor Burst JBT Series, Руководство по эксплуатации

Страница: 27 / 43

25
6. Press one of the Flush buttons. The
FLUSH CONTINUOUSLY button will
continue indefinitely until you press the
CANCEL button. The FLUSH – XXX
SECONDS button will flush the line for
predetermined time. There is a timer on the
screen that will show how much time has
passed.
NOTE: YOU MAY CANCEL THE FLUSH
PROCEDURE AT ANY TIME BY TOUCHING
THE CANCEL KEY. HOWEVER, THE
SYSTEM
MUST COMPLETE A FULL 15
MINUTE FLUSH PROCESS FOR EACH
SYRUP LINE
IN ORDER TO COMPLY WITH
SANITATION GUIDELINES.
NOTE: WHILE THE FLUSH FUNCTION IS
ACTIVE, YOU WILL NOT BE ABLE TO
PERFORM OTHER FUNCTIONS ON THE
JUMBO TOUCH PANEL.
NOTE: TO CHANGE THE LENGTH OF TIME
THE FLUSH PROCEDURES RUN, SEE
“FLUSHING AND PRIMING SETTINGS” OF
THE MAINTENANCE MENU.
7. Repeat these steps for other lines that need
to be flushed, or disconnect the Pump Flush
Adapter.
8. Clean and sanitize the Syrup Bag
Connector and syrup bag fitment before
reconnecting the syrup bag to the syrup
line. For full cleaning instructions of the
connectors and other related parts, see
section SCHEDULED MAINTENANCE
“Clean-In-Place Procedure”.
9. If there is more than one spout using the
Flavor Burst system, press the green
CHANGE SPOUT button to access that
spout’s syrup lines.
(spout 1)
(spout 2)