Flavor Burst FB 80D Series, Руководство пользователя

Страница: 70 / 81

69
Setting Serving Size Timing
The FB 80D keypad has a program functioned
into the electronics that signals the operator to
cease drawing product at a preset time for each
serving size (small, medium, and large). This
helps the operator draw consistent sizes. Also,
the unit is programmed to automatically cease
the flow of syrup seconds before the signal is
given, reducing carryover of product from
serving to serving. The operator simply
determines the length of time it takes to draw a
desired size of cone and then programs it into
the keypad. The FB 80D can be programmed
to set small, medium and large sizes.
Ensure that the freezer is set to the desired
product flow rate according to the freezer
manufacturer’s instructions.
1. To adjust the small serving, press the “-”
key. To adjust the large serving, press the
“+” key. Two lights illuminate beside the size
that is selected. The medium serving is the
default serving size; if the size is not
illuminated, press CANCEL ENTRY to
return to the default medium setting. (See
Figure 203.)
LARGE “
+
”
MEDIUM
(DEFAULT OR
CANCEL ENTRY)
SMALL “
-
”
26295
Figure 203
2. Press and hold the TIMER key for three
seconds until the SERVING TIME
ADJUSTMENT light is illuminated. (See
Figure 204.)
26296
Figure 204
3. The number of illuminated bars in the graph
represent the length of time the serving is
dispensed. Use the following chart to
determine the bar graph setting needed for
the desired serving size time. (See
Figure 205.)
26297
Figure 205
NOTE: SET THE SERVING TIME TO LEVEL
10 (NO LIMIT) TO DISABLE THE SERVING
SIZE FUNCTION FOR LARGE AND MEDIUM
SIZES.