Flavor Burst FB 80D Series, Руководство пользователя

Страница: 57 / 81

56
6. The 9-Tube Assembly slides into the
smaller slot on the Bracket so that the
coupler casing is above the bracket and the
syrup tubes hang below. (See Figure 159.)
26187
Figure 159
7. The Drive Motor hangs upside down in the
larger slot, so that the heads of the
mounting screws slide above the Bracket,
and the rest of the Motor hangs below it.
(See Figure 160.)
26186
Figure 160
Remote Microprocessor Module Connection
and Power Up
The electrical connections for the FB 80D are
located on the Remote Microprocessor Module.
The Module can be placed according to
preference with the 6’ extension cord attached
to the lower back of the cabinet. Once
connected to the Cabinet and turned on, the
Microprocessor Module can remain on during
normal operations. It does not need to be
turned off unless it is serviced or moved, or
unless it is not used for a long period of time.
ELECTRICAL HAZARD: DO NOT
HANDLE OR OPERATE IN PRESENCE OF
WATER. FAILURE TO COMPLY MAY
RESULT IN SERIOUS ELECTRICAL SHOCK
OR ELECTROCUTION.
1. Ensure the power-switch is in the “off”
position. Connect the Rotor Cable and the
Keypad Cable to the appropriate fitments
labeled on the Module. (See Figure 161.)
26220
Figure 161
2. Tighten the 4 strain-relief screws with a
flathead screwdriver. (See Figure 162.)
Figure 162
3. Connect one end of the Pump Cable to the
outlet at the lower back of the cabinet.
Tighten the connector ring to secure. (See
Figure 163.)
Figure 163