Flavor Burst CTP-SNS, Руководство пользователя

Страница: 42 / 54

40
Motor Log
This screen shows all the commands sent to
the pumps and motors. It should be cleared
periodically.
1. Touch the “Motor Log” section in the
Maintenance Menu.
2. If you wish to clear the Motor Log, press the
CLEAR LOG button in the right corner.
Diagnostics
This section allows you to test the pumps,
motors, and switches of the system and will
detect if anything isn’t working properly.
1. Press the “Diagnostics” section in the
Maintenance Menu.
2. Bank A / Bank B Motor Tests On the
electronics board located inside the cabinet,
Bank A and Bank B operate all of the pump
motors for the flavors and sanitizer system.
Only one Bank is used at a time (Bank A by
default). If one goes bad, however, the
wiring harness can be connected to the
other Bank for power.
To test the motors attached to Bank A or
Bank B, select the Bank in operation.