Flavor Burst CTP 80BEV, Оборудование, техническое обслуживание и эксплуатация: Руководство, Страница: 58 / 76

57
Installing the Spout Adapter
Every CTP 80BEV system ships with a
standard spout adapter common to most
freezers. Additional adapters are available from
your local distributor for use with other models
and freezer manufacturers. See the
ALTERNATE PARTS AND KITS BY FREEZER
MODEL section for more information.
The o-rings of the adapter are wear items and
will need to be replaced periodically. Always
keep spare o-rings in the Spare Parts Kit.
1. Ensure the freezer door spout is clean and
sanitized.
2. Install the larger o-ring inside the top groove
of the spout adapter, and the lower o-ring
on the lower groove.
3. Install the spout adapter assembly onto the
freezer spout. Push up on the adapter with
your palm to ensure it is evenly and fully
installed.
Installing the Blending System and
Suspension Bracket
The suspension bracket helps stabilize the
Blending Assembly on the freezer. When
properly installed on the freezer, the bracket
should hold the Blending Assembly level
horizontally, with the Blending Head lined up
directly under the spout adapter. The
suspension bracket is adjustable to fit many
common freezer models. Additional
suspension bracket styles may be available for
other freezer models through your distributor.
The Blending Assembly can be mounted to
either side of the freezer spout. The 9-Tube
Assembly may also come from either side,
regardless of the Blending Assembly’s position.
However, on single freezer models, the
following position is highly recommended.
RECOMMENDED POSITIONING:
(A) When installing on a single-barrel freezer,
install the Blending Assembly on the
opposite side of the 9-Tube Assembly’s
placement.
Placing the Drive Motor
opposite from the 9-Tube Assembly makes
it easier to attach and remove the 9-Tube
Assembly when cleaning.
26135
26138
DRIVE MOTOR vs. 9-TUBE ASSEMBLY
A
26057