Lighting the Main Burner (via the Remote Handset)
With the pilot burner established it is possible to light the main burner and adjust
the gas rate between high and low with the remote control handset.
Press the “up” button to light the main burner and adjust the heat input
to the maximum setting. (6.9kW heat input). Press the “down” button to reduce
the heat input to the minimum setting (3.5kW heat input). See Fig. 2 below. If you
press and hold the “down” button it will reduce the heat input to the minimum
(3.5kW heat input) setting, if you keep the button depressed it will turn the main
burner off at this point a clicking noise will be heard from the motor.
Fig. 2
If the remote does not work, first check the LED in the top left hand corner is
illuminating when the button is pressed. If it does not illuminate, change the
battery in the handset.
NOTE : The remote control does not light the pilot, it only lights
the main burner when the pilot flame is established and regulates
the heat input between high and low. If the remote is lost or
broken, the fire can still be operated manually, see previous page
for details.
IMPORTANT : IF THE BURNER IS EXTINGUISHED FOR ANY REASON YOU
MUST ENSURE THAT YOU WAIT A FULL FIVE MINUTES BEFORE
ATTEMPTING TO RE-LIGHT THE FIRE.
5
“Up” button to
increase heat input
“Down” button to
decrease heat input
or turn off main
burner
