3.1
ASSEMBLY OF THE FUELBED
a)
Fit the fuelbed base into the combustion chamber as shown below in
Fig. 1. Ensure that the slot in the fuel-bed is located onto the lip on the
fuel-bed base support.
Fig. 1
b)
Fit coal “A” onto the fuelbed base in the position as shown below in
Fig. 2. The coal form has the individual placement letters stamped on
the bottom face.
Fig. 2
NOTE : The position of the fuel-bed components are critical to the
performance of the product. Therefore please ensure that the fuel-bed
components are positioned as described in the following section prior to
requesting a service call due to soot build up, poor flame pattern etc.
6
Coal Form “A”
Burner
Locating Lip on
Fuel-bed Support
Section View of
Fuel-bed Base / Burner
