FlashPoint Studio 300 Monolight, Руководство пользователя

Страница: 9 / 12

9
Flashtube Replacement
Turn off the power and remove the power cord before replacing the flash tube. Note the ground
wire wrapped on the flashtube. Wear gloves to loosen the metal wire on the tube. Keep a firm
hold on the two contact prongs of the flash tube and pull out the tube gently. Remove the contact
prong sleeves from the old tube and put them on the new one. Hold two prongs of the new tube,
and carefully directly towards the two copper socket outlets on the body, then push them carefully
and firmly into place. Replace the ground wire on the flash tube as on the original tube.
TECHNICAL DATA
Flashpoint Model Studio 300 Monolight Studio 400 Monolight
Max Power (Ws) 300Ws 400Ws
Guide Number( ISO 100) 190ft / 58m 213ft / 65m
Color Temperature 5600±200k
Operating Voltage AC200-240V/50Hz or AC100-120V/60Hz
Power Output Control From 1/16 (6.0) to 1/1 (10.0) full power in tenths of a stop increments
Modeling Lamp (W) 150W
Modeling Lamp Level 5%~100%
Recycle Time 0.4~2.5s 0.4~2s
Triggering Methods R2 Wireless built-in, Sync cord, Test button, Optical slave triggering,
R1 Wireless USB port
Flash Duration 1/2000~1/800s
Fuse 5A
Dimension Flash diameter Φ 5.0in/12.7cm.
8.1in/20.6cm
Length 13.4in/34cm Flash diameter Φ 5.0in/12.7cm.
9.1in/23.2cm
Length 15in/38cm
Net Weight Approx. 4.1lb / 1.9kg Approx. 4.6 lb / 2.1 kg
Groups 16 [A-F and 0-9]
Channels 32
R2 2.4GHz Radio Range 328ft/100m