8
Buzz Function
The sound button (8) is used for turning on the audible tone for signaling the ready status of the
flash after recycling. The sound symbol is displayed on the LCD panel when active. A brief tone is
heard indicating ready to fire status.
Key Button Combinations
Pressing the the GR/CH button and the S1/S2 buttons simultaneously turns the built-in R2 wireless
receiver ON or OFF. If there are no wireless and channel indicators displayed on the LCD panel, the
built-in wireless receiver is off. The presence of a Channel indicates that the R2 wireless receiver is
on. Press the S1/S2 and BUZZ buttons simultaneously to recover factory settings.
Alarm Display
E0 The temperature sensor is not connected.
E1 A recycle error related to capacitance and voltage regulation.
E2 Components are over safe temperature limits.
E3 Discharged capacitance and voltage rating >+10%. Audible alarm sounds, ringing twice per
second. Press SET button to stop alarm signal.
Memory Function
The device is equipped with a memory function for retaining all the settings, 3 seconds after you
set it. When turning on the flash the next time, the panel setting will be set the same as the last use.
R1 Wireless Control Function
The flash unit has a built-in R2 2.4G wireless receiver, but R1 devices can be used with the Flash-
point R1 transmitter and receiver (FPRRSL) set.
•
The flash unit has a Wireless Control Port (9) that can
accept R1 remote control of the flash, modeling lamp
and audio signal, as well as adjust the flash output
level, and other functions.
•
To control the flash wirelessly, you need the Flashpoint R1 Transmitter and Receiver remote control
set (on-camera and on-flash). Insert the USB end into the Wireless Control Port (9) on the flash and
insert the transmitter device into the camera hot shoe. Settings made on the hotshoe-mounted
transmit and receive signals will be
wirelessly communicated to the flash. The camera shutter-release button transmits your com-
mands to trigger the flash.
•
For full instructions on the use of R1 series remote control, see the The Flashpoint R1 Transmitter
and Receiver Set (FPRRSL) user manual.
Содержание Studio 300 Monolight
Страница 1: ...Studio 300 400 Monolight with Built in R2 2 4GHz Radio Remote System FPLFS300B FPLFS400B...
Страница 12: ......
