FlashPoint FPLFSMZO, Руководство пользователя, Страница: 9 / 24

9
Flash Output Levels
The following table makes it easier to see how the display changes
in terms of f/stop when you increase or decrease the flash output.
For example, when you decrease the flash output to 1/2, 1/2-0.3,
or1/2-0.7, and then increase the flash output to more than 1/2,
1/2+0.3, 1/2+0.7, and 1/1 will be displayed.
Optical S1 Secondary Unit Setting
In M, manual flash mode, press Function Button 3 <
S1/S2
>
button so that this flash can function as an optic S1 secondary flash
with optic sensor. With this function, the flash will fire synchronous-
ly when the main flash fires, the same effect as that by the use of
radio triggers. This helps create multiple lighting effects.
Optical S2 Secondary Unit Setting
Press Function Button 3 <
S1/S2
> button so that this flash can
also function as an optic S2 secondary flash with optic sensor in
M manual flash mode. This is useful when cameras have pre-flash
function. With this function, the flash will ignore a single “preflash”
from the main flash and will only fire in response to the second,
actual flash from the main unit.
Manual Off Camera High-speed Setting (Non-Flashpoint wireless
R2 system)
In M, manual flash mode, press Function Button 4 < > button
to select high-speed mode and
H
is displayed.
S1 and S2 optic triggering and off camera high-speed
mode are only available in M manual flash mode.
Flashpoint Accessories
R2 Radios R1 Radios Blast Power Pack
BP-960
Speedlight
Reflector
Flash Diffuser
Hexapop/Parapop
Rapid Deployment
Softboxes