FlashPoint FPLFSMZO, Руководство пользователя, Страница: 19 / 24

19
Firmware Upgrade
This flash supports firmware upgrade through the USB port.
Update information will be released on our official website.
Protection Functions
1. Overheating - Temperature Protection
• To avoid overheating and deteriorating the flash head, do not
fire more than 30 continuous flashes in fast succession at 1/1
full power. After 30 continuous flashes, allow a rest time of at
least 10 minutes.
•
If you fire more than 30 continuous flashes and then fire
more flashes in short intervals, the inner over-temperature
protection function may be activated and make the recycling
time over 10 seconds. If this occurs, allow a rest time of about
10 minutes, and the flash unit will then return to normal.
• When the over-heat protection is started, is shown on
the LCD display.
Number of flashes that will activate over-temperature
protection:
Number of flashes that will activate over-temperature
protection in high-speed sync triggering mode:
USB connection cord is not included in this product. The USB
port is a standard Micro USB socket.
Power Output Level
1/1
1/2 +0.7
1/2 +0.3
1/2
1/4(+0.3,+0.7)
1/8(+0.3,+0.7)
1/16(+0.3,+0.7)
1/32(+0.3,+0.7)
1/64(+0.3,+0.7)
1/128(+0.3,+0.7)
Number of Flashes
30
40
50
60
100
200
300
500
1000
Power Output Times
1/1
1/2(+0.3,+0.7);
1/4(+0.3,+0.7)
1/8(+0.3,+0.7);
1/16(+0.3,+0.7)
1/32(+0.3,+0.7);
1/64(+0.3,+0.7);
1/128(+0.3,+0.7);
15
20
30
40
50