FlashPoint FPLFSMZO, Руководство пользователя, Страница: 13 / 24

13
2
3
4
5
6
Slave Unit Setting
• Set the other camera flash
as the wireless slave unit.
(Page 12)
• The slave unit can be set
as A/B/C.
Check the communication
channel
• Set the master unit and
slave unit(s) to the same
channel. (Page 12)
Position the camera and
flashes
• Position the camera and
flashes as the picture
suggests. (Page 15)
Check that the flash is
ready
• Check that the master
flash ready indicator is
illuminated.
• When the slave flash ready
indicator is ready, the AF-
assist beam panel area will
blink at 1 second intervals.
Check the flash operation
• Press the master unit’s Test
Button < >
.
• The slave unit will fire. If not,
check whether the slave unit
is set in the right position.
The slave unit might be out of order or fire an unwanted
flash due to the nearby fluorescent lamp or computer
screen influence.
• If the slave unit’s auto power off function is triggered,
press the master unit’s test button to power the flash
on. Please note that test firing is unavailable during the
camera’s regular operation.
• The effective time of slave auto power off is changeable in
the Custom Functions. (C.Fn-Sv APOT/ Page 18)
Using Fully Automatic Wireless Flash
The FEC and other flash settings that are set on the master unit will
be transmitted to the slave unit automatically. The slave unit does not
need any input for settings when they are set on the master flash. Use
the same method of compensation for wireless slave units as with
normal flash shooting.
• See Flash Exposure Compensation < > / Page 7
Multiple Master Flashes
It is possible to use two or more master units. Each master will
transmit to the slave as each camera is fired. Even though several
cameras have master flashes attached, the single linked slave will
respond to the setting of each master flash.