FlashPoint FPLFSMZ, Руководство пользователя

Страница: 14 / 20

13
Protection Functions
1. Over-Heat Protection
To avoid overheating and deteriorating the flash head, do
not fire more than 20 continuous flashes in fast succession
at 1/1 full power. After 20 continuous flashes, allow a rest
time of at least 10 minutes.
If you fire more than 20 continuous flashes and then fire
more flashes in short intervals, the inner over-temperature
protection function may be activated and make the
recycling time about 10 to 15 seconds. If this occurs, allow
a rest time of about 10 minutes, and the flash unit will
then return to normal.
When the over-temperature protection is started, is
shown on the LCD display.
Number of flashes that will activate over-temperature protection:
Power Output Level
1/1
1/2 +0.7
1/2 +0.3
1/2
1/4 ( +0.3,+0.7 )
1/8 ( +0.3,+0.7 )
1/16 ( +0.3,+0.7 )
1/32 ( +0.3,+0.7 )
1/64 ( +0.3,+0.7 )
1/128 ( +0.3,+0.7 )
Number of Flashes
20
30
40
60
100
200
300
500
1000
Number of flashes that will activate over-temperature
protection in high-speed sync mode:
Power Output Level
1/1
1/2 ( +0.3,+0.7 )
1/4 ( +0.3,+0.7 )
1/8 ( +0.3,+0.7 )
1/16 ( +0.3,+0.7 )
1/32 ( +0.3,+0.7 )
1/64 ( +0.3,+0.7 )
1/128 ( +0.3,+0.7 )
Number of Flashes
15
20
30
40
50