FlashPoint FPLFSMZ, Руководство пользователя

Страница: 15 / 20

14
The system provides real-time protection to secure the device
and your safety. The following lists prompts for your reference:
2. Other Protections
Meaning Prompts on LCD Panel
E0
E1
E2
E3
A failure occurred in the temperature sensor.
Please send the unit to a maintenance center.
A failure occurred in the recycling system so
that the flash cannot fire. Please restart the
flash unit. If the problem persists, please send
the unit to a maintenance center.
The system has excessive heat. Please allow a
rest time of 10 minutes.
The voltage on two outlets of the flash tube is
too high. Please send the unit to a maintenance
center.
Other Features
If the wall or ceiling is too far away, the bounced flash
might be too weak and result in underexposure.
The wall or ceiling should be a plain, white color for
high reflectance. If the bounce surface is not white, a
color cast may appear in the picture.
By pointing the flash head toward a wall or ceiling, the flash will
bounce off the surface before illuminating the subject. This can
soften shadows behind the subject for a more natural-looking shot.
This is called bounce flash.
Bounce Flash
To set the bounce direction, hold the flash head and turn it to
the desired angle.