Flashforge THOR300T, Быстрый старт

Страница: 18 / 40

17
Extruder
Done
Extruder
Unload started, press down on the
spring lever and withdraw filament
1. Plug filament guide tube out of the extruder
filament intake, make sure that filament
exposed 10cm for easily being pulled out.
2. Tap [Tools] on the touch screen.
3. Tap [Filament]. 4. Tap [Unload].
5. The extruder starts to heat. When extruder
heating to target temperature, press down
the spring presser, and press down filament
for 3 seconds in the meanwhile until you see
filament come out of the nozzle, then pull it
out quickly.
For the change filament in the daily use, please operate follow
the steps below:
Unloading Filament
Press here
Push filament down through for 3 seconds