Guider User Guide | www.ff3dp.com
39
perpendicular rings appear around the object Click one ring and rotate on the present
axis, you will see the rotation angle and direction in the center of circle. In this way,
you could make the model rotate on X/Y/Z axis.
Method 2:
Click the
[Rotate]
icon
on the left, and then enter into rotating
angel values in X/Y/Z axes positioning. Click
[Reset]
to reset rotating angel values.
5.1.7
Scale
Select the target object and scale the object by the following two methods:
Method 1:
Click the
[Scale]
icon
on the left, hold down the left mouse button
and scale the model. The corresponding values will display near the object..
Method 2:
Click the
[Scale]
icon
on the left and then enter into scale values
in X/Y/Z axes positioning. Click the
[Maximum]
button to get largest size possible
for building. Click
[Reset]
to reset the size of model.
Note:
If the
[Uniform Scaling]
radio button is clicked, it will scale the model in equal
proportion when changing
value
in any positioning of the model. Otherwise it will
only change the value of the corresponding positioning.
5.1.8
Cut
Left-click on the model to select it and double-click on the
Cut icon
to set the cut
plane. The direction and position are available for setting.
①
Draw with Mouse
Содержание Guider
Страница 1: ...Guider User Guide www ff3dp com 1 Flashforge Guider 3D Printer User Guide...
Страница 32: ...Guider User Guide www ff3dp com 31 then Tap Finish to exit...
Страница 67: ...Guider User Guide www ff3dp com 66 2 Model with Small area Overhang Treelike support structure...
Страница 75: ...Guider User Guide www ff3dp com 74...
