Flashforge Guider 3, Руководство пользователя, Страница: 13 / 56

2.4 Network Connection
2.4.1 Wired Network Connection
1. Plug the network cable into the network cable port on the back of the equipment.
2. Click the [ ] - [Network] on the screen, select the wired network and turn on the
wired network switch. If the [ ] icon appears at the upper right corner of the
screen, it indicates that the network is successfully connected.
11
2.4.2 Wireless Network Connection
Please make sure Wi-Fi is installed before connecting to the wireless network,
otherwise the wireless signal will be affected.
Calibration Home Move Network Cloud
Wi-Fi
No connect Wi-Fi
< Network
1. Click the [ ] - [Network] on the
touch screen, select the wireless
network, and turn on the wireless
network switch.
2. Click to connect to the corresponding
wireless network and the corresponding
prompt will appear on the screen after
successful connection. If the [ ] icon
appears at the upper right corner of the
screen, it indicates that the network
is successfully connected.
Wi-Fi
SSID has been connected
OK
10.33.23.222
IP: 10.03.03.111
< Network
1/2
Configure IPV4
Ethernet
IP Address：
Netmask：
Gateway：
DNS Server：
10.33.23.222
255.255.255.0
10.33.23.1
202.101.172.35
No connect
Udhcpc
< Network
Configure IPV4
Ethernet
IP Address：
Netmask：
Gateway：
DNS Server：
10.33.23.222
255.255.255.0
10.33.23.1
202.101.172.35
Connect
Udhcpc
< Network