Guider IIS series User Guide | www.flashforge.com
d. XYZ coordinate frame on the right side: Show the current position of
extruder/build plate.
e. Make Current Position Zero button: Set the current position of the
extruder/build plate as (0, 0, 0). (NOTE: X, Y, and Z boxes are for display
purposes. Changing the value in the boxes will not affect anything.
f. Center X/Y/Z button: Extruder and build platform will back to the zero (0, 0,
0) you set last time.
g. X/Y Speed and Z Speed: Set the move speed of extruder/ build platform.
●
Limit Switch: In order to protect your Guider IIS, three limit switches are
equipped to control the maximum position, and the three limit switches
corresponding to X/Y/Z axis limit switch. It has two statuses:
a. Not Triggered: If the extruder/build plate don
’
t move to its maximum,
X/Y/Z axis limit switch is not triggered, and shows
“
Not Triggered
”
.
b. Triggered: If the extruder/build plate moves to its maximum, X/Y/Z axis
limit switch is triggered, and shows
“
Triggered
”
.
●
Stepper Motor Controls: Allows users to control to stepper motor. Click
[Enable], and lock the motor so it does not allow any movement; click
[Disable], and unlock the motor to be controlled manually.
●
LED Color: Allow users to change the LED color of Guider IIS.
●
Extruder Controls: You can set the value of
“
Motor Speed (RPM)
”
,
which can control the rotation speed of filament feeding wheel. The motor
rotation time can be controlled via setting the value of
“
Extruder Duration
”
.
Generally we suggest the users choose option of continuous time 60 seconds.
The filament must be loaded in the extruder before motor starts. Therefore,
do not start rotation operation until the extruder temperature reaches to